The filter cartridge is the most important element of the filter system. Filter elements with one process remove solid impurities + water + soft sludge (sediments, resins, varnishes). Filter elements are made according to the type of treated liquid. For industrial liquids based on petroleum products, the filter elements are made of special cellulose produced according to a special recipe. The cellulose is wound onto the core on computer-controlled winding machines. The cellulose coil, which ensures the precise capture of contaminants, is adapted specifically for individual types of filter inserts. The lower part of the filter insert is pressed into a reinforcing paper circle so that it has a higher density than the upper part. This design guarantees gradual capture of contaminants. Larger contaminants are captured in the upper part and smaller ones up to 1 µm in the lower part of the filter insert. The hard paper circle increases the accuracy of filtration and prevents deformation of the filter elements. The non-woven fabric is pressed into the bottom of the filter element and prevents trapped contaminants from re-entering the system. For easier removal of the element from the filter body, each filter element contains pull-out strips.
For water-glycol-based industrial liquids, filter elements of type WG, SWG are made of synthetic non-woven fabrics (PP) and do not absorb water, only solid contaminants.
WE inserts (water eater.) are designed for high water contamination of the oil and emergency conditions.
The result of the specially developed design of the filter elements is highly precise and effective filtration. Filter elements remove a very large amount of solid contaminants of metallic and non-metallic origin and water without damaging, changing or removing the general properties of the oil. Filter elements do not capture and do not remove additives and ingredients from the oil!!! The result of ECOFIL filtration is that the oil remains clean and undamaged.
years of experieces
Type HH is designed for super fine filtration and treatment of oils with an emphasis on the removal of soft sludge, deposits, varnish, resins and particulates. The filter cartridge removes and traps solid particles from 1µm in size. The filter cartridge is specially designed to remove soft sludges, deposits and resins up to MPC ΔE ≥ 1 and purity class NAS1638 3, ISO4406 14/12/9. The HH filter cartridge is designed for the treatment of oils in servo valve systems and sensitive laboratory instrumentation.
Filter cartridges type HH - specification
Type H is designed for the gentle filtration and treatment of oils with emphasis on the removal of soft sludges, deposits, varnishes, resins and solid particles. The filter element removes and traps water and solid particles from 3µm in size. The filter element is specially designed to remove solid particles to NAS1638 cleanliness class 4, ISO4406 15/13/10. Filter element H is designed to treat oils in systems with proportional valves and servo valves.
Filter elements type H - specification
Type T is designed for standard filtration and treatment of oils with emphasis on removal of solids and water. The filter element removes and traps water and solid particles from 5µm in size. The filter element is designed to remove solid particles to NAS1638 cleanliness class 7, ISO4406 18/16/13. The T filter element is designed to treat oils in medium pressure systems, turbines, gear pumps, automatic transmissions, etc..
Filter element type T - specification
Type WE (Water Eater) is designed for the filtration and treatment of oils with emphasis on the removal of large free water. The filter element removes and traps water and solid particles from 10µm in size. The filter element is designed to remove free water to a level of 300 ppm (300gm/litre) and solids to NAS1638 cleanliness class 8-9, ISO4406 19/17/14. The WE filter element is designed for the treatment of oils in low pressure systems.
Filter elements type WE - specification
Type GB (gerabox) is designed for filtration and treatment of high viscosity oils up to 1000 cSt (mm2/s). The filter element removes and traps water and solid particles from 8 µm size. The filter element is designed to remove solid particles to NAS1638 cleanliness class 8-9, ISO4406 19/17/14. The GB filter element is designed for the treatment of high viscosity oils in gearboxes and low-pressure systems.
Filter elements type GB - specification
Type TRAFO is designed for filtration and treatment of insulating (transformer) oils. The filter element removes and traps free and bound water and solid particles from 1 µm in size. The filter element is designed to remove free and bound water to a level of 1 ppm (1gm/litre) and solid particles to NAS1638 cleanliness class 3, ISO4406 14/12/9. After treatment with the TRAFO liner, the insulating oil achieves a breakdown voltage ≥ 70 kV/2.5mm. The TRAFO filter element is designed for the treatment of oils in electrical systems with insulating oils.
Filter elements type TRAFO - specification
Type H (water-glycol) is designed for filtration and treatment of water-glycol based industrial liquids. The WG filter element is made of polypropylene (PP) wound on a cellulose cavity and is encapsulated in a cellulose reinforcing ring. The filter element removes solid particles from 5µm in size. The filter cartridge is designed to remove solid particles to NAS1638 cleanliness class 8-9, ISO4406 19/17/14. The WG filter element is designed for treatment of industrial fluids in low pressure systems.
Filter elements type WG - specification
Type SWG Type SWG (water-glycol) is designed for filtration and treatment of water-glycol based industrial liquids. The WG filter element is made completely of polypropylene (PP). The filter element removes solid particles from a size of 10µm. The filter element is designed to remove solid particles to purity class NAS1638 8-9, ISO4406 19/17/14. The SWG filter element is designed for the treatment of industrial fluids in low pressure systems.
Filter elements type SWG - specification
The TAN type is designed for regeneration of insulating (transformer) oils. The regeneration element removes and captures oil oxidation and ageing products, DBDS and solid particles from 3 µm size. The regeneration element is designed for complete regeneration of insulating (transformer) oils at temperatures from 8-25 oC! After regeneration with the TAN element, the insulating oil reaches breakdown voltage ≥ 70 kV/2.5mm, IFT (mN/m) ≥ 35, color (ISO2049) max. 2.0, DBDS (mg/kg) < 4.5. The TAN regeneration element is designed for regeneration of oils in electrical systems with insulating oils in service!
Filter elements type TAN - specification
The Kleenoil type is a 100% copy and replacement for Kleenoil filter elements. Type Kleenoil is designed for standard oil filtration and treatment, to remove particulates and water.
Filter elements type Kleenoil - specification
Type H Doublepass, H Triplepass is designed for gentle filtration and treatment of oils with emphasis on removal of soft sludge, deposits, varnish, resins and particles. The filter element design provides high efficiency per flow, double or triple. Type H Doublepass, H Triplepass requires the use of a quick release filter body extension. The filter element removes and traps water and solid particles from 3µm in size. The filter element is specially designed to remove solid particles to NAS1638 cleanliness class 4, ISO4406 15/13/10. The H Doublepass, H Triplepass filter element is designed for oil treatment in proportional valve and servo valve systems.
Filter elements type H DoublePass, H TriplePass - specification
Type T401 LONG is designed for large capacity standard filtration and treatment of oils with emphasis on the removal of solid particles and water. The filter element removes and traps water and solid particles from 5µm in size. The filter element is designed to remove solid particles to NAS1638 cleanliness class 7, ISO4406 18/16/13. The T401 LONG filter element is designed for large capacity oil treatment in medium pressure systems, turbines, gear pumps, automatic transmissions, etc.
Filter elements type T401 LONG - specification
Type T051 H051 are designed for low volume oil filling. Type T051 and H051 are designed for the gentle filtration and treatment of oils with emphasis on the removal of soft sludge, varnish, resin and particles. The filter element removes and traps water and solid particles from 3µm and 5µm in size. The filter element is specifically designed to remove solid particles to NAS1638 cleanliness class 6-7, ISO4406 18/16/13. The T051 and H051 filter elements are designed for oil treatment in robotic systems and low volume oil systems.
Filter elements type T051 H051 - specification
The FUEL type is specially designed for the filtration and treatment of diesel-based fuels with an emphasis on the removal of particulates and water. The filter element removes and traps water and solid particles from 5µm in size. The filter element is designed to remove solid particles to NAS1638 cleanliness class 7, ISO4406 18/16/13.
Filter elements FUEL type - specification
The TripleR type The TripleR type is a 100% copy and replacement for the TripleR filter housings. Type TripleR is designed for standard oil filtration and treatment, to remove particulates and water.
Filter elements TripleR - specification
